PHC Corporation MDF-C8V1-PE Ultra-Low Temperature Chest Freezer (84 L)
PHC Corporation · MDF-C8V1-PE · ref ML-85C3F03F
Description
The PHCBI freezer is fully operational and approved, but has transport damage to the front in the form of a dent, which affects the overall condition of the unit. Key specifications Type: ULT chest freezer Temperature range: approx. -60°C to -80°C (max. -80°C) Capacity: 84 liters (3.0 cu ft) Cooling system: Automatic cascade with single compressor and mixed refrigerant Storage capacity: approx. 42 cryoboxes (5 cm) Dimensions and weight External dimensions (W × D × H): 550 × 685 × 945 mm Internal dimensions (W × D × H): 405 × 490 × 425 mm Net weight: approx. 67 kg Key features VIP PLUS vacuum insulation panels for greater storage capacity and higher energy efficiency Microprocessor control with digital display and alarm functions for temperature and power failure Compact, personal-sized freezer with a small footprint of approx. 0.37 m² Energy consumption: approx. 7.2 kWh/day Noise level: approx. 47 dB(A)
Pre-owned equipment sold by a third-party reseller through MerkaLoop. Ships directly from the reseller.
Specifications
- Condition
- Good
- Manufacturer
- PHC Corporation
- Model
- MDF-C8V1-PE
- Equipment weight
- approx. 67 kg
- Type
- ULT chest freezer
- Warranty
- 1 month
- External W D H
- 550 × 685 × 945 mm
- Internal W D H
- 405 × 490 × 425 mm
- Storage Capacity
- approx. 42 cryoboxes
- Temperature Range
- approx. -60°C to -80°C
- Refrigeration System
- Single-compressor auto-cascade with mixed refrigerant
- Capacity
- 84 liters
- Noise Level
- approx. 47 dB
- Cooling System
- Automatic cascade with single compressor and mixed refrigerant
- Energy Consumption
- approx. 7.2 kWh/day
- External Dimensions W D H
- 550 × 685 × 945 mm
- Internal Dimensions W D H
- 405 × 490 × 425 mm
Shipping & Logistics
MerkaLoop coordinates all logistics. Timelines depend on seller location and your destination.
- MerkaLoop coordinates all logistics
- Shipping quoted before payment
- Ships globally
Shipping from: Netherlands
It is your responsibility to check local regulations and requirements for the handling, acceptance, and servicing of secondhand and new equipment.
contact MerkaLoop about this equipment
