Bio-Rad Bio-Plex 200 Suspension Array System

Description

Bio-Plex 200 System General Technical Specifications Environmental conditions Operating temperature 15–30°C (59–86°F) Operating humidity 20–80%, noncondensing Operating altitude Designed to operate at 2,400 m (7,874 ft) above mean sea level or below Compensatory range ± 2°C UL installation category UL Installation Category II, as defined in Annex J of UL 3101-1 Pollution degree Pollution Degree 2, as defined in Section 3.7.3.2 of UL 3101-1 Array Reader Specifications Input voltage range 100–240 V, ~1.5 A, 47–63 Hz Physical dimensions (W x D x H) 43 x 51 x 23 cm Weight 23 kg (60 lb) Lasers Reporter laser 532 nm, 10 mW Classification laser 635 nm, 8.5 mW, diode Fluidics Sheath flow rate 90 μl/sec Cuvette 200 μm square flow channel Sample injection rate 60 μl/min Electronics Reporter channel Photomultiplier tube, A/D resolution 14 bits detection Classification and Avalanche photodiodes with temperature doublet discriminator compensation, A/D resolution 12 bits channel detection Communications interface RS232 and USB Signal processing Measurement resolution 15 bits effective Processor modes Linear, with logarithmic or linear display option Dynamic range 70 dB Microplate Platform Specifications Input voltage range 100–240 V, ~2.25 A, 47–63 Hz Physical dimensions (W x D x H) 44 x 61 x 8 cm (17.3 x 24 x 3 in) Weight 14.4 kg (32 lb) Communications interface RS232 Plate capacity One 96-well microplate no thicker than 0.75 in HTF Specifications Input voltage range 100–240 V, 1.8 A, 47–63 Hz Physical dimensions (W x D x H) 20 x 30 x 75 cm, (8 x 12 x 10 in) Weight 9 kg (20 lb)