Sartorius Incucyte S3-C2 Live-Cell Analysis System (with PHCbi CO2 Incubator), image 1
Sartorius Incucyte S3-C2 Live-Cell Analysis System (with PHCbi CO2 Incubator), image 2Sartorius Incucyte S3-C2 Live-Cell Analysis System (with PHCbi CO2 Incubator), image 3Sartorius Incucyte S3-C2 Live-Cell Analysis System (with PHCbi CO2 Incubator), image 4Sartorius Incucyte S3-C2 Live-Cell Analysis System (with PHCbi CO2 Incubator), image 5Sartorius Incucyte S3-C2 Live-Cell Analysis System (with PHCbi CO2 Incubator), image 6Sartorius Incucyte S3-C2 Live-Cell Analysis System (with PHCbi CO2 Incubator), image 7Sartorius Incucyte S3-C2 Live-Cell Analysis System (with PHCbi CO2 Incubator), image 8Sartorius Incucyte S3-C2 Live-Cell Analysis System (with PHCbi CO2 Incubator), image 9Sartorius Incucyte S3-C2 Live-Cell Analysis System (with PHCbi CO2 Incubator), image 10
VerifiedPre-ownedGood

Sartorius Incucyte S3-C2 Live-Cell Analysis System (with PHCbi CO2 Incubator)

Sartorius · Incucyte S3-C2 · 2023 · ref ML-49945844

Price

€38,500€131,57971% off

+VAT where applicable

We plant a tree for every item sold

Description

About this model

The Incucyte S3-C2 is a live-cell imaging and analysis system that sits inside a standard cell culture incubator and images cells in their vessels over hours to weeks. A microscope gantry with an automated 4X, 10X and 20X objective turret acquires HD phase contrast and green and red fluorescence images from up to six microplates, or flasks and dishes on three interchangeable trays, while an external controller schedules scans, stores the data and runs the analysis software.

This unit

Incucyte S3-C2 live-cell analysis system built in January 2023, supplied with the PHCbi CO2 incubator it was installed in. Configuration: Incucyte S3-C2 gantry with objectives fitted on the automated turret; Incucyte S3-C2 controller with touchscreen and four drive bays; PHCbi MCO-230AICUV-PE CO2 incubator (230 L) with H2O2 decontamination generator. Condition and testing: used. In the seller's photographs the controller is powered on and its information screen is displayed; the network connection reads 'Not detected'. Software and computer: the controller runs Windows 10. Versions shown on the controller: LCD panel software 2020.3.1.66, Incucyte controller 2023A Rev2, firmware 2021.3.3.0 Rev2, motion controller 2023.1.2.0 (hardware revision 3).

What's Included

Incucyte S3-C2 gantry; Incucyte S3-C2 controller; objectives as fitted; vessel trays; PHCbi MCO-230AICUV-PE CO2 incubator with shelves, trays and H2O2 generator; incubator operating instructions; power cables.

Pre-owned equipment sold by a third-party reseller through MerkaLoop. Ships directly from the reseller.

Specifications

Condition
Good
Year Manufactured
2023
Manufacturer
Sartorius
Model
Incucyte S3-C2
Phase
Single
Components
Microscope gantryand external controller
Objectives
4X, 10X, 20X on an automated turret
System Type
Live-cell imaging and analysis system that operates inside a cell culture incubator
Current Draw
3.5 A max at 120 V, 1.75 A max at 240 V
Vessel Trays
3
Imaging Modes
HD phase contrast, green fluorescence, red fluorescence
Other Labware
35, 60, 100 and 150 mm dishes and chamber slides
Optical Module
Green/Red dual colour module
Max Microplates
6
Gantry Weight Kg
23.6
Image Resolution
4X: 2.82 µm/pixel; 10X: 1.24 µm/pixel; 20X: 0.62 µm/pixel
Operating System
64-bit Windows 10
Flask Compatibility
T-25, T-50, T-75, T-100, T-175, T-225
Controller Weight Kg
18.6
Fluorescence Channels
2
Gantry Dimensions Hwd
32.0 x 45.0 x 47.8 cm
Incubator Requirement
Incubator with more than 200 L internal volume
Internal Data Storage
27.3 TB RAID and 64 GB RAM on instruments manufactured after 31 May 2021; earlier controllers show 16.4 TB
Exported Image Formats
JPEG, PNG, TIFF, MetaMorph Multi Dimensional File v2.0, Meta Imaging Series TIFF
Exported Movie Formats
WMV, AVI, MPEG-4
Excitation Emission Red
Excitation 567 to 607 nm, emission 622 to 704 nm
Controller Dimensions Hwd
14.0 x 43.2 x 57.7 cm
Excitation Emission Green
Excitation 441 to 481 nm, emission 503 to 544 nm
Gantry Operating Conditions
0 to 42 °C, 5 to 95 % RH non-condensing
Controller Operating Conditions
0 to 33 °C, 5 to 90 % RH non-condensing
Co2 Control
true
Temp Control
true
Manuals Included
true
Software Version
Controller 2023A Rev2; firmware 2021.3.3.0 Rev2
Incubator Included
PHCbi MCO-230AICUV-PE, serial 221160362

Shipping & Logistics

MerkaLoop coordinates all logistics. Timelines depend on seller location and your destination.

  • MerkaLoop coordinates all logistics
  • Shipping quoted before payment
  • Ships globally

Shipping from: France

It is your responsibility to check local regulations and requirements for the handling, acceptance, and servicing of secondhand and new equipment.

contact MerkaLoop about this equipment

Similar Equipment