Biotage Selekt Flash Chromatography System (SEL-2SV)
Biotage · Selekt · ref ML-D9CCC63F
60 days, parts and labour. A support case must be opened within the warranty period; keep the original packing.
Description
About this model
Automated flash purification system with two column channels, four solvent inlets, 1 to 300 mL/min at up to 30 bar, UV (200-400 nm) or UV-Vis (198-810 nm) detection and RFID rack handling. Optional Spektra software licence.
This unit
Biotage Selekt SEL-2SV automated flash purification system with Spektra licence: two column channels, four solvent channels, UV detector 200 to 400 nm, 1 to 300 ml/min at up to 30 bar (435 psi), QR column identification, RFID rack handling and solvent tray leak detection. Configuration: - Biotage Selekt SEL-2SV, serial SEL210500842 - Spektra licence - Solvent detector Condition and testing: Pre-owned, good condition with only 26 runs; some cosmetic scratches on the touchscreen. Lamp 303 hours, last UV calibration 29 March 2024. Serviced by the seller, who verified power-up and initialisation, fraction arm positioning, RFID rack detection, the QR scanner, solvent ports 1 to 4, method creation, gradient formation, flush and air flush, and a reverse-phase run with a phenacetin and N-benzylbenzamide test mix. Passed all tests. Software and computer: On-board software 2.3.0.4 with Spektra licence; no PC needed. Not included: glassware, test tubes, columns.
Equipment History & Condition
Pre-owned; serviced and tested by the seller's in-house service team. Ships from the USA.
What's Included
Biotage Selekt SEL-2SV Collection tray for three racks Collection rack 4 column holders (10, 25, 50 and 200 g) 4 solvent lines with weighted filters 4 solvent bottle caps (38-430 thread) Solvent tray with leak sensor Standard power cord Touchscreen stylus
Pre-owned equipment sold by a third-party reseller through MerkaLoop. Ships directly from the reseller.
Specifications
- Condition
- Good
- Manufacturer
- Biotage
- Model
- Selekt
- Max Pressure
- 0–30 bar. bar
- Ports
- Ethernet port, 4 USB ports, 2 D-Sub 9-pin ports, and AUX port.
- Power
- Electrical supply: 100–127, 220–240 VAC, 50/60 Hz. Connect only to a grounded outlet. Fuses: T4A-250 VAC, P/N 411916. Max power consumed: 300 VA.
- Spektra
- Add-on software licence for the Selekt family. Lambda-all scans all wavelengths at once for full spectral analysis of peaks as they elute; lambda-all and two individual wavelengths can be shown at once; post-run processing, automatic baseline correction and wavelength focusing.
- Firmware
- Pump V0.13.25, Controller V1.18.64, UV detector V0.10.22, RFID V1.06.04
- Interface
- 15.0"solvent stable TFT LCD touch screen.
- Data Entry
- Touchscreen or USB connection to mouse/keyboard.
- Rack Types
- 13 x 100 mm, 16 x 100 mm, 16 x 150 mm, 18 x 150 mm, 25 x 150 mm, 120 mL, 240 mL, and 480 mL.
- Part Numbers
- SEL-2SV = Biotage Selekt, Two Channel, Single Collection Bed, UV Detector; SEL-2SW = Biotage Selekt, Two Channel, Single Collection Bed, UV-VIS Detector
- Certification
- CE and FCC marked. CB and NRTL certified.
- Network Access
- Included
- Solvent Supply
- A maximum of 4 x 5 liter reservoirs on the optional secondary solvent containment. Larger reservoirs than 5 liters must be placed elsewhere. Note: To be compliant with the secondary containment regulations, do not use containers larger than 4 liters.
- Column Channels
- Two
- Flow Rate Range
- 1–300 mL/min, in 1 mL/min increments.
- Solvent Channels
- Four solvent lines; binary gradient with an additional modifier
- Wetted Materials
- stainless steel, FFKM, PEEK, PP, PE, FEP, PTFE, silica, carbon fiber filled PTFE, and fused silica
- Column Size Range
- Up to 340 g; up to 1.85 kg with an added safety valve
- Gradient Precision
- ±2%.
- Rack Identification
- Rack Handling + RFID
- Instrument Weight Kg
- 23–25 kgdepending on the system configuration
- Operating Conditions
- Location: A laboratory fume hood with the capacity to handle leakage of solvents and provide suitable airflow to prevent the build-up of flammable vapors. Ambient temperature: Operating: 15–32 °C. Storage and transportation: -25–60 °C. Humidity: 20–95% RH. Altitude: Operation: up to 2000 m above sea level. Pollution degree 2.
- Column Identification
- QR Code Scanner
- Instrument Dimensions
- Footprint:335/550 mm x 393 mm. The width depends on using one or two collection trays. Height: 545 mmexcluding secondary solvent containment.
- Software Compatibility
- On-board UNIX-based Java interface with full on-screen QWERTY keyboard. Optional: Biotage Spektra Software Package, Selekt Remote Control, Selekt Monitor API.
- Max Number Of Fractions
- 144 fractions with no rack changeusing 13 x 100 mm racks.
- Max Total Fraction Volume
- 3,840 mL with no rack change, 480 mL bottle racks.
- Internal Detector Wavelength
- 200–400 nmor 198–810 nm. Amplitude range: 0 to 6400 mAU; accuracy of ±5 mAU.
- Usage
- 26 runs, lamp 303 h
- Technique
- Flash
- Detector Types
- UV 200-400 nm; Biotage Solvent Detector
- Software Included
- Selekt software 2.3.0.4, Spektra licence
Shipping & Logistics
MerkaLoop coordinates all logistics. Timelines depend on seller location and your destination.
- MerkaLoop coordinates all logistics
- Shipping quoted before payment
- Ships globally
Shipping from: United States
It is your responsibility to check local regulations and requirements for the handling, acceptance, and servicing of secondhand and new equipment.
contact MerkaLoop about this equipment
Similar Equipment
Pre-owned · Good · 2022
Cytiva ÄKTA avant 150 FPLC System
$63,795
Pre-owned · Good · 2021
Cytiva ÄKTA avant 150 FPLC System
$55,000
Pre-owned · Good · 2022
Teledyne ISCO CombiFlash NextGen 300+ Flash Chromatography System (ELSD)
$12,650
Pre-owned · Good · 2018
Teledyne ISCO CombiFlash NextGen 300+ Flash Chromatography System (ELSD)
$12,650